Kenmore S3218A-KIT Owner's Manual download pdf (Page 24)

CONVERSION INSTRUCTIONS

3. Put the new orifice into the orifice removal

tool (B), and then insert the tool into the

burner opening and tighten the new orifice

into the valve.

Repeat this step for all three burners.

Make sure you are using the correct

orifice, which is marked “1.37”.

(Fig. 50)

4. Rotate the air shutter opening from the

LP setting to the NG setting.

LP: 1/4" open

NG: 1/6" to 1/8" open

(Fig. 51)

Searing Burner Conversion

1. Remove screws at the back of searing

burner to detach it from bracket. Then lift

the burner while sliding it out of firebox.

(Fig. 52)

2. Insert the provided orifice removal tool (B)

into the burner opening and unscrew orifice

from end of valve.(Fig.53)

1.37

Fig. 50

Air shutter opening to adjust

Fig. 51

Fig. 52

Orifice

Fig. 53

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 65 66

No comments

Kenmore S3218A-KIT Owner's Manual Page 24