Kenmore S3218A-KIT Owner's Manual download pdf (Page 25)

CONVERSION INSTRUCTIONS

3. Put the new orifice into the orifice

removal tool (B), and then insert the tool

into the burner opening and tighten the new

orifice to the valve.

Make sure you are using the correct orifice,

which is marked “1.44”. (Fig. 54)

4. Replace burner and screws. Make sure

to engage the tube over valve as shown.

(Fig. 55)

Side Burner Conversion

1. Remove the side burner screws

(5/32-32x3/8 in.) to expose the side burner

valve.

Insert the tool onto the valve and unscrew

orifice from end of valve. Put the new orifice

into the orifice removal tool and tighten the

new orifice into the valve.

Make sure you are using the correct

orifice, which is marked “1.31”. (Fig. 56)

2. Engage burner tube over valve as shown.

(Fig. 57)

5/32-32x3/8 in. screw

Fig. 56

Fig. 57

The side burner

The sear burner

Fig. 55

1.44

Fig. 54

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 65 66

No comments

Kenmore S3218A-KIT Owner's Manual Page 25