Kenmore 31220 Owner's Manual download pdf (Page 20)

- 20 -

BELT CHANGING

Replace belt whenever a burning rubber

smell caused by excessive slippage

occurs.

1. Lay vacuum cle

t.

2. Release lower plate by rotating the

lower plate latches to the UNLOCK

ower plate.

3. Remove agitator by carefully lifting

out.

4. Remove worn or broken belt.

5. Clean agitator. See AGITATOR

CLEANING (page 21).

6. Loop new belt around motor shaft and

agitator.

. Reinstall agitator back into nozzle by

placing end caps into grooves.

8. Reinstall lower plate by aligning tabs

on front edge of lower plate with slots in

the nozzle and rotating to installed

position.

 Press lower plate onto nozzle and

secure by rotating the lower plate latches

to the LOCK position.

WARNING

Always unplug power cord from electrical

outlet before performing maintenance to

the vacuum cleaner.

CAUTION

Motor shaft may be hot.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 47 48

No comments

Kenmore 31220 Owner's Manual Page 20