Kenmore 1.4 cu. ft. Trash Compactor - Black Owner's Manual download pdf (Page 6)

Location Requirements

Product dimensions

Cutout dimensions

Clearance dimensions

Electrical Requirements

Recommended Grounding Method

This compactor is for use on a single phase, 115-volt, 60 Hz, AC

only, 15- or 20-amp fused and properly grounded circuit and is

equipped with a grounding plug as shown below. It is

recommended that a separate circuit serving only this appliance

be provided.

This compactor must be grounded while in use to reduce the risk

of electric shock. The compactor is equipped with a

three-conductor cord and 3 prong grounding-type plug to fit the

proper grounding-type receptacle. The green (or green and

yellow) conductor in the cord is the grounding wire. Do not

connect the green (or green and yellow) wire to a live terminal.

A. Grounded electrical outlet must be a minimum of 3" (7.6 cm)

away from surrounding cabinets or nearby walls as shown. It

can be placed either to the left or the right side of the product.

34¹⁄₈"

(86.7 cm)

24"

(61 cm)

15"

(38.1 cm)

24" min.

(61 cm)

34¹⁄₄" min.

(87 cm)

18" min.

(45.7 cm)

3" min.

(7.6 cm)

15¹⁄₄" min.

(38.7 cm)

A. Leave 6" (15.2 cm) of clearance space to the right side of the

compactor in order to remove the compactor bags.

B. Leave 23" (58.4 cm) of clearance in front of the compactor in

order to fully open or remove the compactor drawer.

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death,

fire, or electrical shock.

WARNING

1 2 3 4 5 6 7 8 9 10 11 ... 43 44

Comments to this Manuals

No comments

Kenmore 1.4 cu. ft. Trash Compactor - Black Owner's Manual Page 6

Comments to this Manuals