Kenmore 5303304549 User Manual download pdf (Page 18)

OCCURRENCE

SURFACE ELEMENTS (continued)

POSSIBLE CAUSE

SOLUTION

Surface element does not heat.

No power to appliance.

Check/reset circuit iareaker or replace

fuse If the problem is a circuit overload,

have this situation corrcted by a quali

fied electrician.

Incorrect control turned on

Be sure to use the correct control for the

- element to be used.

OVEN AND/OR LIGHTS (if equipped)

DO NOT WORK

Oven light (some models) does not

work.

Burned-out of loose bulb

Follow instructions under Oven Light

(some models) to replace or tighten

bulb

Entire oven does not operate.

CortiTlug not plugged into the

wallAloor receptacle.

Make sure it is plugged tightly into out

let.

Service wiring not complete.

Contact servicer or dealer

Power outage

Check house lights to be sure. Call your

local electric company for service.

Controls) not set properly.

Follow instructions under Settin g 0 ven

Controls to set the controls

BROILING

Oven smokes excessively during

broiling-

Oven door closed

Door should be opened to broil stop

position,

Meat too dose to the element

Reposition the rack to provide proper

clearance between the meat and the

element. Preheat broil element for quick

searing operation.

Meat not properly prepared

Remove excess fat from meat, Slash

remaining fatty edges to prevent curl

ing, but do not cut into lean

Grid on broiler pan wrong side-

up. Grease does not drain into

broiler pan

Always place the grid on the broiler pan

with the ribs up and the slots down to

allow grease to drip into pan.

POOR BAKING RESULTS

Oven needs to be cleaned Grease

has built up on oven surfaces

Regular cleaning is necessary when

broiling frequently Old grease or food

spatters cause excessive smoking

Many factors affect baking re

sults

See Baking in your Cooking Guide for

hints, causes and corrections

18

1 2 ... 13 14 15 16 17 18 19 20

Comments to this Manuals

No comments