Kenmore 758.15408 User Manual download pdf (Page 6)

step 3. Water Fill

WARNING: To reduce the risk of fire

or shock hazard, do not pour or spill

water Into control or motor area.

If controls get wet, let them dry

completely and have unit checked by

authorized service personnel before

plugging in.

After the humidifier is positioned where it

will be operating you are ready to fill the

humidifier. The bottle lifts straight up and

away from the base. Take care not to

bump or damage fill valve assembly on

the bottom of the bottle.

Invert the bottle. Press the valve stem

button into the bottle and turn clockwise

to lock in open position. Place bottle

under the faucet. Fill the bottle, being

careful not to allow any debris to get in

the bottle. Debris may interfere with the

valve seating. Once the bottle is full,

press the valve stem button and turn

counter clockwise to release and close.

CAUTION: Use only 32-14900 EPA

Registered Bacteriostat available

from Sears Retail store. Under no

circumstances should you use water

treatment products designed for

Roto belt or Ultrasonic humidifiers.

Place the water bottle back into the

humidifier base. When positioned

properly, the plunger will open and the

water will flow into the base. The base

will hold the entire contents of the water

bottle. Once the bottle is empty, remove it

and repeat the filling process. The

humidifier is now filled to capacity. To

benefit from less frequent filling let the

humidifier exhaust both the water from

the bottle and the base before filling.

Bottle

- Base

PUSH IN

TURN

1 2 3 4 5 6 7 8 9 10 11 ... 31 32

Comments to this Manuals

No comments