Kenmore 59771 User Manual download pdf (Page 10)

Automatic acernaker and ace & Chilled Water Dispenser

See separate Water Line Installation Requirements

included in both the literature pack and on the back

of the refrigerator.

An automatic icemaker and a dispenser provide

chilled water, ice cubes and crushed ice through the

freezer compartment door.

Here's how they work:

flows from I-Water

household water

supply through

(1) dua! solenoid valve to

(2) water reservoir and to

(3) automatic icemaker

as needed.

Water is frozen in

(4) cube mold and

ejected into

(5) storage bin where a

motor-powered auger

moves cubes forward into dispensing unit_

Cubed or crushed ice, as selected, dispense through

chute in door when cradle is pressed,

When switch is moved to CRUSHED, baffle in

housing channels cubes through crusher and

crushed ice falls through chute into glass.

Chilled water from reservoir flows through

(6) tubing in door and is dispensed when cradle

is pressed.

Pressure on cradle turns light in dispenser on,

releasing pressure turns the light off.

(7) A light switch also turns night light in dispenser

on and off.

Important Facts about Your"Dispenser

o Your icemaker will produce eight cubes

per cyclemapproximately 120 cubes in a 24-hour

period--depending on freezer compartment

temperature, room temperature, number of door

openings and other' use conditions.

o Intermittent dispensing of ice is normal.

If ice flow interruption is more than brief, ice

clump(s) may be the cause and should be removed

following instructions on page 11_

o Avoid overfilling glasses with ice and using

narrow or extra.tall glasses. This can jam the

chute or cause the door in the chute to freeze shut_

Periodically open the freezer compartment door and

look down into the chute. If ice is blocking the chute,

poke it through with a wooden spoon,

o To help keep bits of ice from being sprayed

beyond the glass, place glass close to ice chute--

but not so close that it blocks outcoming ice_

o Do not dispense ice into thin glasses, fine

china or delicate crystal--they can crack or chip

from combined pressure of hand pressing them

against cradle and ice dropping into container°

e Dispense ice before filling glass with soda or

other beverage mixes. This will prevent splashing

which is annoying and which, if the splash reaches

the ice selector switch, could cause it to stick or bind°

o meverages and foods should not be quick.

chilled in the ice storage bin, Cans, bottles or

food packages in the storage bin may cause the

icemaker to malfunction.

o Ice other than that produced by your

icemaker should not be added to the ice

storage bin_it may not crush or dispense well.

Before Using Your Icemaker and Dis )enser

If refrigerator is

operated before

water connection is

made, raise ice access / _

doorand make sure " /1

icemaker feeler arm is ,/_

in OFF (up) position.

ICe access

dool _

-- lcemQker

Feeler Arm

in ON

position

When water supply has been connected to

icemaker, move feeler arm to ON (down) position.

Depress water dispenser cradle for about two

minutes to remove trapped air from the water line

and to fill water reservoir automatically.

The ice cube mold will automatically fill with water

after cooling to freezing temperature, and first cubes

normally freeze after several hours°

When cubes are solidly frozen, they will be ejected

from the mold into the ice storage bin by means of a

sweeper arm° lcemaking will continue until the

feeler arm senses that there are enough cubes in the

bin and halts the operation temporarily. Be sure

nothing interferes with the swing of the feeler arm.

For maximum ice storage, level the stored cubes

with your hand occasionally

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments

Kenmore 59771 User Manual Page 10

Comments to this Manuals

Related products and manuals for Fridges Kenmore 59771