Kenmore 21742 Owner's Manual download pdf (Page 7)

7

CAUTION

To allow door to close and seal

properly, DO NOT let food packages

extend past the front of shelves.

First Steps

To install the handle clips to the basket:

1. Place the basket on a rm,

at surface.

2. With the narrow side of the handle

clip on the inside of the basket,

snap the handle clip to the recessed

area in the basket.

Door Removal If door must be removed:

1. Gently lay the unit on its back, on

a rug or blanket.

2. Remove 2 base screws and base panel.

3. Remove wire from clips on bottom

of cabinet if required.

4. Unplug connector, if required, by

holding the cabinet connector

in place and pulling the door

connector out.

5. Remove bottom hinge screws.

6. Remove plastic top hinge cover.

7. Remove screws from top hinge.

8. Remove top hinge from cabinet.

9. Remove door and bottom hinge

from cabinet.

10. To replace door reverse the above

order, and securely tighten all

screws to prevent hinge slippage.

3. Once the inside surface snaps in

place, continue the process by

rolling the handle clip slightly

outward and pressing down rmly

to snap onto the outside surface.

If installed incorrectly, the handle

clip will not lay at.

1 2 3 4 5 6 7 8 9 10 11 12 ... 47 48

Comments to this Manuals

No comments