Kenmore 45 Bottle Wine Chiller Owner's Manual download pdf (Page 5)

wine chiller

wine chiller.

wine

Temperature Adjustment

: Press this pad once and the temperature will increase 1° F/C.

: Press this pad once and the temperature will decrease 1° F/C.

LED light pad; press to turn light on or oﬀ.

Press and POWER together for 2 seconds to convert between Fahrenheit

temperature and Celsius temperature.

The wine chiller can be operated by adjusting the temperature control buttons (up arrow

and down arrow)

to various settings.

The new desired temperature will ﬂash on the display for a few seconds and then switch

back to the actual

temperature which will gradually change until setpoint is reached.

The temperature range MIN and MAX is 41° - 65°F (5° - 18°C),

Failure Codes

If "E" and "F" display, contact Sears or another qualiﬁed service center for unit repair.

If the temperature in the chiller is too low, it will display “L”.

If the temperature in the chiller is too high, the control will ﬂash "H", and an alarm will sound

for 30 seconds. One minute later, the alarm will continue to sound for another 30 seconds.

After three times, the alarm will not sound any more. You can press any key to cancel the sound

alarm.

Storing too many cans or bottles in the chiller may cause the temperature in the chiller to

rise temporarily.

POWER On/Oﬀ: Press this pad to power the unit on or oﬀ.

Adjust the temperature

control to a warmer setting.

Keep the wine chiller door

you should clean the inside of the chiller compartment before reuse.

closed to preserve compartment coolness for as long as possible. After a prolonged power outage,

remove wine bottles

turn

If moving the wine chiller, always

keep it in a vertical position.

chiller

1 2 3 4 5 6 7 8 9 10 11 12 13

No comments

Kenmore 45 Bottle Wine Chiller Owner's Manual Page 5