Kenmore 152 User Manual download pdf (Page 4)

HOW iT WORKS

This Air Cleaner is equipped with a HEPA (High Efficiency Particulate

Arrestor) filter. Room air is drawn into the Air Cleaner through the Air

intake Grille and passes through the HEPA filter. The filtered air is

released from the top of the unit and is dispersed upwards into the room.

The Air Cleaner has three operating speeds: HI, MED and LO.

The indicator light is "ON" when the Air Cleaner is operating.

Your Air Cleaner has an ionizer with a red light indicating when

it is turned "ON".

Use of ionizer boosts cleaning efficiency and revitalizes stale air.

SET UP

Your Air Cleaner was thoroughly inspected and tested at the

factory prior to packaging. Visually inspect it upon removal

from its box. Remove and discard any packaging material.

Return the unit if it shows any signs of damage or mishandling.

Adjust the filter change wheel to properly indicate when the

next filter change is necessary.

ELECTRICAL HOOKUP

Plug the Air Cleaner into a polarized 120-Volt AC wall outlet.

iZ_WARNiNG:Toavoidtheriskoffireore,ectricshockhazard, thej

Air Cleaner should ONLYbe plugged into a polarized120-Volt AC outlet,

OPERATION

Z_CAUTION! NEVER operate the Air Cleaner without the HEPA filter ]

properly installed, Permanent motor damage cou|d result.

]

Each time you start the Air Cleaner, it is a good idea to run it

at Hi speed for a few seconds for fast, initial cleaning. Then

set to MED or LO as desired.

1 2 3 4 5 6 7 8

No comments

Kenmore 152 User Manual Page 4