Kenmore 1T6.31100 User Manual download pdf (Page 20)

TO REMOVE CLOG FROM HOSE

1. Rotate the extension hose release lever

counter-clockwise to release extension

hose.

Extension Hose

Release Lever-

2. Remove the lower end of the extension

hose from the wand holder by grosplng

the hose collar, twisting, and pulling

straight up.

3. Plug in the vacuum cleoner and turn it

on.

4. Stretch the extension hose to maximum

length and then allow the hose to return

to its natural length.

5. Re-Insert the hose into the original

storage position from which it was

removed. Press firmly to assure

connection.

6. Rotate hose release lever clockwise to

the locked position.

WARNING

Personal Injury Hazard

DO NOT place hands or feet under

neath the vocuum cleaner at any

lime.

If the dust bag, filter áreos and the hose

areas are free of clogs, disconnect the

nozzle hose from the wand holder and

check the nozzle for clogging.

Clean the agitator according to the

instructions in the AGITATOR CLEANING

section.

Return the vacuum cleaner to the upright

position before plugging into an electrical

outlet.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 43 44

No comments

Kenmore 1T6.31100 User Manual Page 20