Kenmore 175.869039 User Manual download pdf (Page 4)

ASSEMBLY

ASSEMBLY OF RECOVERY TANK

AND SOLUTION TANK

See Figure 2

Place Recovery Tank into Solution Tank (align the word

"VACUUM" on Recovery Tank with "VACUUM" on

Solution Tank) and secure with Metal Latch.

Insert the plug on tíre Short Cord from the Solution Tank

into the Recovery Tank Power Head.

ASSEMBLY OF HOSE, WANDS,

NOZZLE AND SOLUTION TUBING

See Figure 1

1. Assemble the two Straight Wands.

2. Assemble the upper Straight Wand to the Angled Wand

of the Hose.

3. Assemble the Floor Nozzle to the lower Straight Wand.

NOTE: Be sure locking button engages properly when

assembling straight wands, angled wand, and floor

nozzle.

4. Push the Solution Tube Quick-DisconnectNutonto Trig

ger Valve. Twist clockwise to lock. See DETAIL “A" -

Figures,

5. Push Solution Tube into Retaining Clips on Wands. Tub

ing may be wrapped around Wands to take up excess

slack. '

6. Attach the Vacuum Hose to Recovery Tank inlet

(Vacuum Inlet).

7. Push solution tube quick disconnect nut onto the quick

disconnect valve. Turn clockwise so valve posts lock into

notches in nut. See DETAIL "B" - Figure 3.

NOTE: To remove metal retaining clips from hose and solution

tube, squeeze tube with fingers before removing. Clips mU dislodge

easily. Also squeeze tube before reattaching clips to prevent hme

punctures.

SOLUTION TUBE QUICK

DISCONNECT NUT

QUICK DISCONNECT

VALVE

1 2 3 4 5 6 7 8 9 ... 15 16

No comments

Kenmore 175.869039 User Manual Page 4