Kenmore 15,000 BTU Multi-Room Air Conditioner Installation Guide download pdf (Page 7)

4. BuildawoodenframewiththeINSIDEdimensionsofyourmodellistedabove.(Measuretwiceremember...)Frame

depthshouldbethesameaswallthickness.Fillinthespacefromtheopendingtothestudswithwoodspacers,as

shown.

5. Nailframetospacerstospacerswithfrontflushwithdrywall.

• Ifwallthicknessis8-1/2"ormore,addalumimumflashingoverbottomofframeopeningtoassurenowatercan

enterareabetweeninnerandouterwall.

NAILSPACERS

TOSTUDS

IG.3

ALUMINUM FLASHING

OVER BOTTOM OF FRAME

Prepare and Install Cabinet

1. Slide air conditioner from cabinet; refer back to Step 1 of Window Mounting.

2. Place cabinet into opening with bottom rail resting firmly on bottom board of wooden frame.

3. Position cabinet to achieve proper downward tilt for water removal. Unit must tilt back 5/16" to 3/8" for proper water

drainage. (See FIG.5 below.)

4. Secure bottom rail to wood frame with two large wood screws 1" (2.5 cm) long using the two holes in the bottom of

the channel resting on frame. (See FIG.6 following)

FIG.5

5/16"- 3/8" J,

Side Louvers

FIG.6

1" LONG

WOOD SCREW

Refer to Step 5 of Window Mounting for assembly of support brackets. Nail a wooden strip to the outside wall for the

angle sill bracket to rest upon. See Fig. 7.

5. Screw or nail cabinet to wooden frame using shims as needed to eliminate cabinet distortion. See Fig. 8. Remember

to maintain proper tilt as described in Step 3.

1 2 3 4 5 6 7 8

No comments

Kenmore 15,000 BTU Multi-Room Air Conditioner Installation Guide Page 7