Kenmore 1030 User Manual download pdf (Page 31)

J."

■T|B|

BUTTONHOLE MAKING

SETTINGS

Stitch Width Control - 4

Stitch Length Control - Red Zone

Zigzag Presser Foot

Use zigzag stitching plate.

1. Carefully mark the position and

length of each buttonhole on your

garment. Select the proper size

buttonhole guide foot to corre

spond with the length of button

hole.

2. Mount the guide foot onto the

presser foot. Holding on to the

top thread, rotate the handwheel

toward you one complete turn.

Pull the upper thread under and

to the back of the buttonhole

guide foot. See Figs. 1 & 2.

3. Note in Fig. 3 that each guide

foot has a dot on the right edge

toward the back of the foot, and

on the left edge near the front of

the foot. These dots are used as a

point of reference for your bartack-

ing steps in buttonholing. (See

next page).

4. Slide the guide foot forward until

the rear edge of the presser foot

is at the rear edge of the guide.

5. Place the fabric with the marked

buttonhole under the guide foot.

Lower the presser foot lever and

follow steps on next page.

(Check Hints for Perfect Button

holes on Page 32.)

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 45 46

No comments

Kenmore 1030 User Manual Page 31