Kenmore 596.50012100 User Manual download pdf (Page 15)

м m mm

l«W ЯШ

^CAUTION

To avoid personal injury or property

damage, observe the iollowing:

3> Confirm shelf is secure before

placing items on shelf.

> Handle tempered glass shelves

carefully. Shelves may break

suddenly it nicked, scratched, or

exposed to sudden temperature

change>

SPILLPROOF SHELVES

Splllproof Shelves hold

simple spills for easier

cleaning

> To remove shelves, lift

up and out

> To install shelves, reverse above

procedure.

Spillproof Slide-out

Shelves feature the

convenience of

easy cleaning

with a pullout

design to reach

items in the back. For ease of cleaning,

glass shelf may be removed by pulling

to full extension and lifting out of frame

DOOR SIORAfil

BEVERAGE

COMPARTMENT

(SOME MODELS)

The temperature-controlled beverage

compartment keeps beverages and

other items colder than the rest of the

fresh food section. Air inlet allows air

from the freezer section to pass to the

beverage compartment

Controls

The control is located on the left wall of

the fresh food section. Control adjusts

amount of air circulating in the beverage

compartment. Turn control clockwise for

colder temperature

To remove and install the beverage

compartment:

> if located directly above the beverage

compartment, dairy center or door

bucket may need to be removed.

Refer to appropriate Instructions and

remove item.

Slide the

beverage

compartment

assembly up

and pull

straight out,

> To install, align one of the cold air

intake holes (A) with one of the two

air Wets (B) in door liner Push

assembly down onto door liner

retainer until it stops,

IMPORTANT: The beverage

compartment will not operate properly if

air intake holes are not aligned with air

inlet in door liner.

DAIRY CENTER

The Dairy Center provides convenient

storage for items such as butter, yogurt,

cheese, etc

This compartment is an adjustable

feature located in the door It can be

moved to several different locations to

accommodate storage needs.

To remove and install bln:

To remove,

slide dairy

center up and

pull out.

> To install, slide

assembly in

above desired door liner retainer and

push down until it stops

To remove and install dairy door;

> To remove, press in sides of dairy

door and pull out

> To install, slide sides of dairy door

inside dairy center until hinge points

snap into place.,

TILT-OUT DOOR BUCKETS

(SOME MODELS)

The TilLOut Bucket assembly consists

of a bucket and frame, providing

adjustable, convenient storage for food

items in door. The bucket assembly tilts

forward for easy access of items, and

lifts out for ease in cleaning and

adjusting.

To remove and install bucket:

>■ To remove

bucket, tip bucket

forward and pull

straight out to

remove

> To install bucket, slide bucket into

bucket frame and push bucket

upright.

To adjust bucket frame:

Remove bucket per

above instructions,

> Lift frame off door

support and place in

desired door location

DOOR BUCKETS

Door Buckets adjust to meet individual

storage needs.

> To remove, slide bucket

up and pull straight out,

>■ To install,

reverse above

procedure

Z

О

15

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 87 88

Comments to this Manuals

No comments