Kenmore ELECTRIC RANGE 790.4660 User Manual download pdf (Page 36)

DISPLAY

Figure 1

INSTRUCTIONS PRESS

Stopping or Interrupting a Self-Cleaning Cycle

If it becomes necessary to stop or interrupt a self-cleaning cycle due to

excessive smoke or fire in the oven:

1. Press I

2. Once the oven has cooled down for approximately 1 HOUR and the

"DOOR", "LOCKED" icon is no longer displayed, the oven door can

beopened(Figurel).

IMPORTANT NOTES when using the Self-Clean feature:

1. The Seif-Clean feature will not operate whenever a radiant element remains ON.

2. A Self-Clean cycle may be started if the appliance has the Cooktop Lockout active. A Self-Clean cycle cannot be

started if Oven Lockout feature is active.

3. If a Self-Clean cycle has started but not finished and a power failure occurs, the appliance may not have thoroughly

cleaned. Once power is restored, set for another Self-Clean cycle to finish.

4. If your clock is set for normal 12 hour display mode the Delay Self-Clean cycle can never be set to start more than

12 hours in advance. To set for Delay Self-Clean 12-24 hours in advance see instructions to set the control for the 24

hour time of day display mode.

Self-Cleaning (confd)

Adjusting Oven Temperature

The temperature in the oven has been preset at the factory. When first using the oven, be

sure to follow recipe times and temperatures. If you think the oven is cooking too hot or too

cool for the temperature you select, you can adjust the actual oven temperature to be more

or less than what is displayed. Before adjusting, test a recipe by using a temperature setting

that is higheror lower than the recommended temperature. The baking results should help

you to decide how much of an adjustment is needed.

INSTRUCTIONS

To adjust the oven temperature higher

1. Press (^baÌ^ for 6 seconds (Figure 2).

2. To increase the temperature use the number pads to enter the

desired change. (Example 30°F) CD® (Figure 3). The

temperature may be increased as much as 35°F (19°C).

3. Press to accept the temperature change and the display will

return to the time of day (Figure 4). Press to reject the change

if necessary.

To adjust the oven temperature lower

1. Press for 6 seconds. 0° will appear in the display (Figure 2).

2. To decrease the temperature use the number pads to enter the

desired change. (Example -30°F) ®® and then press

(Figure 5). The temperature may be decreased as much as

35°F(19°C).

3. Press to accept the temperature change and the display will

return to the time of day (Figure 4). Press to reject the change

if necessary.

PRESS

Start) or

Note: The oven

temperature adjustments

made with this feature

will not change the Self

Clean cycle temperature.

DISPLAY

@®

liiliiiliil

¡1

Figure 2

Figure 3

lOn

Iju

^Ba^

Figure 4

ISsii:Ìy|ìÌÌÌ;Ì:'|C

an'

®®

mmmmrnmm:

Figures

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 42 43 44

Comments to this Manuals

No comments

Kenmore ELECTRIC RANGE 790.4660 User Manual Page 36

Comments to this Manuals

Related products and manuals for Kiln Kenmore ELECTRIC RANGE 790.4660