Kenmore 35162 Owner's Manual download pdf (Page 3)

PART FIGURE (rear view)

1. Rear guard

2. Front guard

3. Blade Set

4. Speed Switch

5. Knobs-Vertical airflow angle adjustment

6. Base

IMPORTANT：

Install the knobs (Obtain from the UCG bag)

on both sides of the fan body as shown

in Fig.1.

OPERATING INSTRUCTIONS

1. Turn switch (A) to desired fan speed:

Off, High, Med, Low. (Fig.2)

2. To adjust vertical airflow angle,

loosen the knobs (B) on the sides

of the fan. Tilt fan body (C)

to the desired angle and

retighten the knobs. (Fig.3)

Low

Med

High

The fan requires little maintenance. Do not try to fix it by yourself. Refer it to

qualified service personnel if service is needed,or call Customer Assistance at

866-646-4332.

1. Before cleaning fan, always unplug it from the electrical outlet.

2. To ensure adequate air circulation to the motor, use a vacuum to keep vents

at the rear of the motor housing free from dust, fluff, etc. Do not disassemble

fan to remove dust or fluff.

CAUTION: To avoid injury from electrical shock, unplug the fan before using a

vacuum cleaner to clean the vents.

3. Wipe the exterior parts with a soft cloth soaking a mild detergent.

Do not use any abrasive detergent or solvents to avoid scratching the surface.

Do not use gasoline or paint thinner as a cleaner.

4. Do not allow water or any other liquid into the motor housing or interior parts.

MAINTENANCE INSTRUCTIONS

Fig.1

Fig.2 Fig.3

1 2 3 4 5 6 7 8 9

No comments

Kenmore 35162 Owner's Manual Page 3