Kenmore 790.4382* User Manual download pdf (Page 8)

Cooktop Control Pads

Using the Touch Control

Be sure that your finger is placed in the center of the touch

pad. If the finger is not placed on the center of a pad, the

cooktop may not respond to the selection made.

Lightly contact the pad with the fiat part of your entire

fingertip. Do not just use the narrow end of your fingertip.

Cooktop Power Pad

The Cooktop POWER key pad activates the entire Cooktop.

To power the cooktop, touch and hold the POWER key pad

for 2 seconds. A beep will sound and the Power LED will glow

(Fig. 12). The cooktop will be in a ready mode for 10 seconds.

If no other key pads are touched the Cooktop Main POWER

will turn OFF automatically.

To turn the Main Power OFF touch and hold the Main POWER

key pad for 1 second. A beep will sound and the Power LED

will turn OFF (Fig. 11).

Fig. 11 Fig. 12

Controls Lock Pad

This feature allows the cooktop to be locked only when the

cooktop is switched to OFF.

To turn ON the Controls Lock feature, touch and hold the

LOCK key pad for 3 seconds. A beep will sound and the

Lock LED will glow (Fig. 14). Once locked, no other displays

will glow and no Cooking Zones will activate (Except the hot

surface message “HE” if the zone is hot).

To turn the Controls Lock OFF, touch and hold the LOCK key

pad for 3 seconds. A beep will sound, the Lock LED will turn

OFF (Fig. 13) and the cooktop may be used normally.

Minute Timer

The Minute Timer feature may be useful in the kitchen if

a recipe calls for keeping track of time. This feature will

keep track of time from 1 to 99 minutes. The Alpha-Numeric

display located to the left of the Timer UP/DOWN arrow

key pads will begin to count down minutes once set.

To Set the Minute Timer:

1. Set the cooktop timer to the desired time by touching

the /V I isted under the word “TIMER”. Touching and

releasing the or the key pads will increase or

decrease the Minute Timer setting by 1 minute with each

key press (up to S3 minutes). You may also hold the or

X/ key to slew the time to your designated time.

2. Once the Timer Alpha-Numeric displays the desired

amount of time, release the /\ or \/ Arrow key pads.

The timer will display the time remaining in minutes within

the countdown process. During the last 60 seconds, the

timer will countdown in seconds.

Note: After the timer is set, it is normal for the displayed

value to automatically go down by one minute. This is

due to the fact that the display only shows the minutes

remaining and does not show the countdown process in

the back ground. For example when setting the timer for

3 minutes, the timer will start counting down at 02 min 59

seconds, but the timer display will only show 03 minutes,

not the remaining seconds.

Once the Minute Timer reaches 00 a long beep will sound

every 5 seconds until and \/ key pads are touched at

the same time and the timer Alpha-Numeric display will

flash “00" indicating that the time is up.

To Cancel the Minute Timer:

At any time to cancel the minute

timer, press the Timer Set/Off

pad.

Fig. 15

Using the Slider Zone Control

The Slider zone control is a new and innovative way to set

your cooking zone power. Heat is controlled by just the

touch of a finger, resulting in a clean look uncluttered by

knobs or dials. These controls are intuitive, precise and very

stylish. Three methods of setting these controls are available

for

a better ease of use.

Powering On/Off the Cooking Zone

Once the cooktop is active, touch the Cooking Zone On/Off

pad (Fig. 16) to activate the slider zone control.

Fig. 16

Setting the Warm & Hold Feature

When the cooking zone is on, press the Warm & Hold pad

(Fig. 17) to keep food at serving temperature.

Fig. 13 Fig. 14

Fig. 17

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments

Kenmore 790.4382* User Manual Page 8

Comments to this Manuals

Related products and manuals for Hobs Kenmore 790.4382*