Kenmore 141.166801 User Manual download pdf (Page 18)

Cleaning and Maintenance

CAUTION:

Be sure your grili is OFF and cool before cleaning.

Take care not to chip or scratch the painted surfaces

because it will void your warranty against rusting.

As with all appliances, proper care and maintenance

will keep your grill in top operating condition and

prolong its life. By following these cleaning procedures

on a timely basis, your grill wilt stay clean and work

properly with minimum effort.

Cleaning The Cooking Grids

Before initial use and periodically we suggest you wash

your Cooking Grids in a mild soap and warm water

solution. You can use a wash cloth or vegetable brush

to clean your Cooking Grids.

5. Cover each Gas Valve Orifice with aluminum foil.

6. Brush the inside and bottom of the grill with a fiber

pad or nylon brush, and wash with a mild soap and

warm water solution. Rinse thoroughly and let dry.

7. Remove aluminum foil from Orifices and check

each Orifice for obstruction.

8. Check each Spark Electrode, adjusting as needed.

The space between the Spark Electrode Tip and

Spark Receiver should be approximately 3/16".

9. Replace the Burners and adjust the Gas Collector

Box. The edge of the collector box should be

overlapping the Burner Port.

10. Replace Flame Tamers and the Cooking Grids.

11. Reconnect the gas source and observe the Burner

f la me for correct operation.

Cleaning The Flame Tamers

Periodically you should wash the Flame Tamers in a

soap and warm water solution. Use a vegetable brush

to remove stubborn bumt-on cooking residue. Dry the

Flame Tamers thoroughly before you reinstall them into

the cooking bowl.

Cleaning The Grease Tray and Receptacle

To reduce the chance of fire, the Grease Draining Tray

and Grease Receptacle should be visually inspected

before each grill use. Remove any grease and wash

Grease Tray and Receptacle with a mild soap and

warm water solution.

Cleaning the Inside of the Grill Lid

Grease can have a tendency to build up on the inside

of the Grili Lid and could drip onto deck or patio when

the lid is opened. Visually inspect the inside of the Grill

Lid before each grill use. Remove any grease and wash

with a mild soap and warm water solution.

Annual Cleaning of The Griii Interior

Burning-off the grill after every cookout will keep it

ready for instant use. However, once a year you should

give the entire grill a thorough cleaning to keep it in top

operating condition. Follow these steps;

1. Turn all Burner Valves to the full OFF position.

2. Turn the LP gas tank valve to the full OFF position.

3. Detach the LP gas hose and regulatorassemblyfrom

your gas grill. Use a 7/8" open end wrench turning the

fitting counter-clockwise. Inspect for any damage

and replace as necessary with Kenmore replace

ment part number found on the Parts List.

4. Remove and clean the Flame Tamers, Cooking

Grids, Cooking Rack and Grill Burners.

Cleaning Exterior Surfaces:

Before initial use, and periodically thereafter, we

suggest you wash your grill using a mild soap and

warm water solution. You can use a wash cloth or

sponge for this process. Do not use a stiff wire or

brass brush that might remove paint during the clean

ing process.

Cleaning Exterior Stainless Steel Surfaces:

Weathering and extreme heat can cause exterior

stainless steel surfaces to turn tan in color. Machine

oils used in the manufacturing process of stainless

steel can also cause this tanning color. After removing

the protective PVC film from the Grili Lid and Control

Panel use a Stainless Steel Cleaner to polish the

stainless steel surfaces of your grili. Never use abra

sive cleaners or scrubbers because they will scratch

and damage your grill. Follow these steps for the best

results.

1. TurntheLPgastankvalve(clockwise)tothefuil OFF

position. Disconnect the regulator and hose assem

bly from LP gas tank. Cover exposed gas fitting with

aluminum foil.

2. Remove dirt or grease using a soft cloth and polish

stainless surfaces. Wipe with a soft cloth.

3. Remove aluminum foil from exposed gas fitting and

allow grill to air dry before attaching the regulator

and hose to your LP gas tank.

Keep outdoor cooking gas appliance area clear and free

from combustible materials, gasoline and other flam

mable vapors and liquids.

Customer Service Helpline: If you have questions about assembly or grill operation, or if there are

damaged or missing parts when you unpack this unit from the shipping box, call us Sam - 8pm CST,

Monday through Friday at: 1-888-317-7642

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 33 34

Comments to this Manuals

No comments

Kenmore 141.166801 User Manual Page 18

Comments to this Manuals

Related products and manuals for Grills Kenmore 141.166801