Kenmore 141.16223 User Manual download pdf (Page 12)

Be sure both Casters are locked, then with the assistance of another person, turn the

assembled grill upright.

Installing Grease Draining Tray Kit

1. Position Grease Draining Tray Heat Shield into slots in Grease Draining Tray. See EhI

2. From the back side of Grill Head install the Grease Draining Tray and Grease Draining Tray

Heat Shield. The Grease Draining Tray Heat Shield is required to be present and

centered for vour safety. ^ ^ ^ ^

3. Insert two M4x8mm Pattern Head Screws into the threaded holes on the Left & Right Bowl

Panel, but do not completely tighten them yet. Slide the slotted holes on the Bowl Wind

Shield onto the two screws ana then tighten firmly. See

4. From the front side of cabinet, install the Grease Receptacle under Grease Draining Tray. See

Bag

Pattern Head Screw M4x8mm

Qty. 2

Ref. # S132M04082

Installing Lighting Stick

1. Attach the Lighting Stick to the Left Bowl Support Bracket as shown.

2. Align the hole at the end of Lighting Stick Wire with the threaded hole on the Left Bowl Sup

port Bracket. Hand tighten using 1 screw. For instructions on manually lighting your grill by

match, refer to page 18.

Lighting Stick

Qty. 1

Ref. # P05313023B

Pattern Head Screw M4x8mm

Qty. 1

Ref. # S132M04082

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 33 34

No comments

Kenmore 141.16223 User Manual Page 12