Kenmore 26-67132 Owner's Manual download pdf (Page 9)

7. Touch and hold START/PAUSE

to begin cycle

Touch and hold the START/PAUSE button to begin the cycle.

Promptly remove items after cycle has completed to reduce

wrinkling. Use the Wrinkle Guard™ option to avoid wrinkling

when you are unable to remove a load from the dryer as soon

as it stops.

5. Set cycle settings, if desired

You may adjust di erent settings depending on whether you

have selected a Sensing Cycle, Timed Cycle, or Steam Refresh

Cycle. See the “Cycle Guide” for detailed information.

NOTE: Not all options and settings are available with all cycles.

Not all cycles are on all models.

Sensing Cycles:

You can select a di erent dryness level, depending on your

load, by touching Dry Level to scroll to More, Normal, or Less.

Selecting More, Normal, or Less automatically adjusts the

dryness level at which the dryer will shut o . Dry Level can be

changed in the  rst 5-8 minutes of the cycle. Sensing cycles give

the best drying in the shortest time. Drying time varies based on

fabric type, load size, and dryness setting.

NOTE: More Dry removes more load moisture. Normal Dry is

used for a starting point for Sensing cycles. Choose Normal

to save energy. Less Dry removes less moisture and is used for

loads you may want to put on a hanger to complete drying.

Timed Cycles:

When you select a Timed Cycle, the default time appears in

the display. Touch “+” and “–” to increase or decrease the time

in 1-minute increments. Touch and hold to change the time in

5-minute increments. The default temperature may be changed

by touching Dry Temp until the desired dry temperature is lit.

4. Select the desired cycle

Select the desired cycle for your load. See the “Cycle Guide”

for more information about each cycle.

Steam Refresh:

Reduces light wrinkles and odors from a few garments at a

time. Do not add dryer sheets.

6. Select any additional options

Add additional options such as Damp Signal by touching that

option. If you will be unable to remove the load promptly, select

the Wrinkle Guard™ options before touching START.

Wrinkle Guard™ or Wrinkle Guard™ w/Steam

option (depending on model)

When you are unable to remove a load of clothes from the

dryer as soon as it stops, wrinkles can form. The Wrinkle

Guard™ option periodically tumbles, rearranges, and  u s the

load to help keep wrinkles from forming. The Wrinkle Guard™

w/Steam setting (depending on model) will add a short steam

cycle after 60 minutes to help smooth out wrinkles. Get up to

150 minutes of heat-free, periodic tumbling at the end of a

cycle. Touch the WRINKLE GUARD™ button to select ON or

OFF at any time before the cycle has ended.

NOTES:

When the Wrinkle Guard™ option is selected and the

Cycle Signal is on, the tone will sound at 15minutes,

30 minutes, and at the end of Wrinkle Guard™.

If you open the dryer door prior to the end of the Wrinkle

Guard™ option, the dryer will go into Pause mode. You will

need to touch Power to turn o or touch Start/Pause

to continue Wrinkle Guard™ option.

Steam model shown

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 47 48

Comments to this Manuals

No comments

Kenmore 26-67132 Owner's Manual Page 9

Comments to this Manuals

Related products and manuals for Electric laundry dryers Kenmore 26-67132