Kenmore 51392 Owner's Manual download pdf (Page 12)

[ \

7/64”

3 X

Align the corresponding bracket to the cabinet side,

while placing rear end of bracket against the wall.

Draw a line on the outer edge of the bracket (as shown).

Slide the bracket towards the center of cabinet and

align the outside edge of the bracket with the marked

line, keeping the rear end edge leaning on the wall.

 Use a pencil to mark 3 holes.

Remove the bracket. Using a 7/64” drill bit, drill 3 holes

where marked.

Assemble the bracket to the cabinet bottom using a

Phillips screwdriver and 3 provided countersunk wood

screws. Repeat for the other cabinet side

FRAMELESS CABINET

Refer to the marking on the brackets to determine the

correct installation side and orientation.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 31 32

No comments

Kenmore 51392 Owner's Manual Page 12