Kenmore TRUE HEPA 106.832 User Manual download pdf (Page 5)

LOCATION REQUIREMENTS

Do not blook air openings or

place air cleaner on soft surface

such as bed or sofa. This could

cause air cleaner to tip over,

blocking air intake opening.

Place air cleaner on a flat, level

surface at least 6 in. (15.2 cm)

away from heat sources such as

ranges or heaters.

This product is intended for

indoor use only.

6" (15.2 cm) Min.

Clearance

OPERATING AIR CLEANER

NOTE: Before operating air cleaner, record date of installation on HEPA filter so

you can replace it annually. To remove and replace HEPA filter, see the “Filter

Replacement” section.

Using the Controls

Power On/Off

1. Plug into a grounded 3 prong outlet.

2. Press POWER ON/OFF to start the

air cleaner.

3. Press FAN SPEED to select desired

speed.

4. Press POWER ON/OFF to stop the

air cleaner.

Sleep

Press SLEEP/LOCK to set the fan

speed to Low for 8 hours. The air

cleaner will then return to the previously

selected setting.

Control Lock

Locks the controls to prevent accidental

changing of the settings.

1. Press and hold SLEEP/LOCK for

5 seconds to set the Control Lock.

2. Press SLEEP/LOCK for 5 seconds to

unlock the controls.

Filter Status Lights

The Pre-Filter and HEPA Filter status

lights will help you know when to

change your filters. The green status

lights will move from New to Change at

pre-set intervals. When the red Change

status light is flashing, replace the filter

as indicated. See the “Filter

Replacement” section.

1 2 3 4 5 6 7 8 9

Comments to this Manuals

No comments

Kenmore TRUE HEPA 106.832 User Manual Page 5

Comments to this Manuals

Related products and manuals for Air purifiers Kenmore TRUE HEPA 106.832