Kenmore PLASMAWAVE 85450 User Manual download pdf (Page 11)

REMOTE CONTROL îB54î)D B5300:Hnly;

BATTERY REPLACEMENT

1. Squeeze lab of battery cover,

2. At the same time pull cover out of remote.

3. Insert battery as shown.

4. Close the battery cover.

CRADLE: The remote control

has a separate wali-mountable

storage cradle that can

be conveniently attached to

any wall using a screw,

BATTERY USE

>» Insert 3V lithium battery CR2025 into the

remote control.

• Incorrect battery usage may cause battery

fluid leakage and/or damage.

» When not using remote control for an ex

tended period, remove the battery.

• Avoid dropping or damaging the remote

control. Keep remote control away from

direct sunlight or heaters.

PROPER OPERATING CONDITIONS

• Operate the remote control facing the air

cleaner.

• Operate within 20 feet of the air cleaner.

IMPROPER OPERATING CONDITIONS

« Any location where there is inverter light

ing equipment or electronic spontaneous

lighting equipment,

• When objects or furniture are located

between the remote and the air cleaner.

• When air cleaner unit is located in direct

sunlight, as sunlight may interfere with the

infrared sensor,

• In areas where fluorescent lighting is

flickering due to worn-out bulbs.

A. POWER; Use the power button to turn

the power on and off A short “beep" will

sound when the unit turns on or off.

B. AUTO: When in AUTO mode, the air

cleaner will automatically sense the

amount of impurities in the air and adjust

the fan speed accordingly. When the

unit Is first turned on it will default to

AUTO mode.

C. FAN SPEED

* UP; Use this button to switch from

automatic operation and increase the

fan speed.

® DOWN: Use this button to switch from

automatic operation and decrease the

fan speed.

D. TURBO; Use this button to switch from

automatic operation and begin the

maximum amount of room air cleaning

and air movement.

12

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 24 25

Comments to this Manuals

No comments