1 Kenmore 12,000 BTU Portable Air Conditioner, Dehumidifier & Heater with Remote Control Use & Care Guide Model
10 Note: After switching the unit on, the ventilator operates, but the compressor only starts after the control lamp has flashed for 3 minutes. Co
11 If the unit is to be placed outside of the room to be cooled, you should try to position the unit on a flat solid surface and in an area protect
12 The cold extract air has to be vented out of the room via the air hose. This can be executed via a tilted window, a door or wall apert
13 B) CLEANING THE FILTER Clean the air filter once every two weeks to remove dust build-up and keep the fan in top performance. Remove the fil
14 If your air conditioner fails to operate, please follow these procedures prior to contacting customer service. PLEASE DO NOT ATTEMPT TO OPEN
15areas). Run the unit for ½ a day. The smell will disappear after a while. In the case of intensive odor development air the room. Compressor does n
161-YEAR WARRANTY (PARTS/LABOUR) 5-YEAR WARRANTY (COMPRESSOR ONLY) VALID ONLY WITH ORIGINAL PURCHASE RECEIPT Warranty: We warrant this product agai
2 Congratulations on purchasing your Kenmore Air-Conditioner, Dehumidifier & Heater unit. Your air-conditioner has been developed and manufactur
3 Use a soft cloth to clean. Do not use wax, thinners or a strong detergent. The appearance of the air conditioner may deteriorate, change color or
4 1. Place the unit in the correct upright position before unpacking. 2. Cut the two packing straps. 3. Slide the carton in an upwards motion an
5 Prior to installing the unit, check for the following: 1. To avoid damage, place the unit in an upright position for at least 12 hours before in
6 Figure 1 Figure 1a The appliance is equipped with an LCDI safety plug to protect the unit. If power
7 1. POWER Press this button to switch the unit on or off 2. MODE Press this button to select between Cooling (), Heating ( ) o
8 6. SPEED Pressing this button sets the ventilation speed to “(low)”, “ (medium)”, “ (high)” or “AUTO (Automatic)”. If “AUTO” is selected, the ven
9 INSERTING OR REPLACING THE BATTERIES - This remote control uses two AAA batteries. Remove the back cover of the remote control. Insert t
Comments to this Manuals